Description :The automatic cold/hot water dispenser is composed of 2 ABS IP65 enclosures (waterproof- airtight or dustproof)- The two enclosures are insensitive to corrosion thanks to their composition- The electronic control unit and the hydraulic unit are separated to avoid condensation on the components- The connection between the enclosures is made by cables and cable glands (supplied)- The electronic unit has a display of the water temperature- litres- the count during the cycle but also an emergency stop button- Technical data :The hydraulic unit has a 3/4″; water inlet and a male water outlet ; there is a 230 V 16 A output for controlling a pump- This box can be equipped with a hydraulic water pump in all stainless steel 304 type MULTIH203 sold separately but this box can also be installed on the network pressure-On the control box- the display of the count is carried out per litre from 0 to 999 litres with a counting unit that will remain the litre with a nominal flow rate of 1500 l/h with an accuracy of 1%*-For the cold water dosing unit- the maximum temperature for the water passage is 30°C- and for the hot water model the maximum temperature is 90°C- They are both on a 230V power supply-The control box measures 195 x 250 x 95 mm and the hydraulic unit: 300 x 200 x 170 mm (*Accuracy given as an indication on a flow rate of 40L/min)
Possible choices :
DEA2+ : Cold water version (30 °C max)
DEA3+ : Hot water version (90 °C max)
