Control, PANICOUPE- Control, Regulator- Control
PANICOUPE UNIVERSAL CONTROLLER RTU620
You must log in to view prices.
Description
Description
This universal controller for bakeries developed by Panicoupe can be adapted to all types of bakery ovens- Its sealing is rated IP65
It features a double temperature display to show the measured temperature and the target temperature- You can choose the type of degree displayed (°C or °F)
This temperature controller has a multi-range temperature control from 0 to +999 °C- To make installation easier- it is delivered already configured in 0/300 °C- Of course- the maximum and minimum temperatures are adjustable- as well as the adjustable Hysteresis (∆T)- You can also set the Display Calibration- There is an exponential speed temperature adjusting mode used for reaching the setpoint very quickly
On the front panel- there are high-sensitivity silicone keys with clear contact marking
The accuracy of this universal controller is 0,5%
The power supply can be 24V or 230V- This is a dual-voltage universal controller
The output relay is a change-over relay- The LEDs permanently indicate the status of the relay and the selection of the type of degree (°C or °F)
The SENSOR input is either thermocouple input J or K (TCJ or TCK) supplied configured in TCJ (SENSOR not supplied)- either as a 2 or 3-wire PT100 SENSOR input
Dimensions and assembly:
The front panel is compact with a height and width of 96 mm in composite material- The case is 65 mm deep (96 x 96 x 65 mm)
The universal controller is connected via three individual- plug-in rear terminals: 1 for the power supply- 1 for the SENSOR and 1 for the output relay
Caution- the RTU620 SENSOR must be ordered separately-
It comes with mini side brackets with integrated screws- These enable the controller to be cbulbed and attached solidly- They can be attached to the 4 sides-
Possibility of choosing:
Change-over relay- IP65 tightness level- • Dual voltage supply 24 V and 230 V- • Thermocouple input J or K- delivered configured in TCJ (SENSOR not supplied)- •
RTU620: SENSOR input: TCJ or TCK supplied configured as TCJ (SENSOR not supplied)-
RTU620P: SENSOR input: PT100 (2 or 3 wires) (SENSOR not supplied)-
Additional information
Reviews (0)
- There are no reviews yet.
Be the first to review “PANICOUPE UNIVERSAL CONTROLLER RTU620”